home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Ham Radio 2000
/
Ham Radio 2000.iso
/
ham2000
/
mods
/
cellular
/
oki04.txt
< prev
next >
Wrap
Text File
|
1993-04-17
|
3KB
|
83 lines
OKI 900
NOTES: This unit has five NAM's.
The ESN prefix is 129 decimal & 81 hex.
OKI: 1-800-554-3112
NAM programing:
1. Turn power on.
2. Within 30 seconds press RCL & MENU keys together and release, enter
* 1 2 3 4 5 6 7 8 #, (or enter dealer password if one has been used).
NOTE: If the dealer password is unknown and the factory default does not
work use the following "back door" code: * 6 2 7 2 9 8 5 4 #.
3. The phone will then display the Software Version followed by the
ESN in hex
NOTE: If you used the dealer password successfully in step 2 go straight
to step 5 below.
4. The phone will display "ENTER NEW PW AND STO" you may enter a ten digit
password at this stage to be used in future re-programings. Press
STO to retain default password or enter a ten digit password and press STO.
5. The phone will display "RE-ENTER PW AND STO" re-enter the password, press
STO to confirm. Again, press STO to retain default password.
6. The following "re-set" options can be bypassed by pressing volume down
to scroll. Each step is followed two seconds later by "Press * to Clear",
you can either press * or press CLR to bypass.
Step# Display Action
01 SSN# Wait 2 seconds.
Press * to Reset Press * to clear social security (not used)
02 SPD MEM CLR Wait 2 seconds.
Press * to Reset Press * to initialize speed dial memories.
03 DEFAULT DATA SET Wait 2 seconds.
Press * to Reset Press * to initialize unit.
POWER ON MESSAGE Wait 2 seconds.
Enter ALPHA Enter up to 8 characters followed by STO,
or press CLR to bypass.
7. The STO key stores each entry.
8. The Volume UP key scrolls down through the steps.
9. The Volume DOWN key scrolls UP through the steps.
10. At any time press CLR to exit program mode. Phone will display
"NAM x Program" press CLR to exit, or continue with additional NAMS.
You may also go directly to any NAM by pressing Volume Down when phone
displays "NAM x Program". NAM's 2 through 5 only have steps 01 - 06
below.
PROGRAMMING DATA:
STEP# #OF DIGITS/RANGE DISPLAY DESCRIPTION
01 10 DIGITS Own# MIN (AREA CODE & PHONE NUMBER)
02 5 DIGITS System ID SYSTEM ID
03 4 DIGITS IPCH NO. IPCH AUTOMATICALLY SET
04 2 DIGITS ACCOLCC ACCESS OVERLOAD
05 2 DIGITS GIM GROUP ID (10 FOR USA)
06 3 OR 4 DIGITS Unlock LOCK CODE
07 4 DIGITS SCM STATION CLASS MARK, USE 1000.
08 4 DIGITS/0 OR 1 OPTION OPTION BITS:
1 enables, from left to right:
MIN Mark
Hands Free
Local Use
NOT USED
9 6 DIGITS SECURITY SECURITY CODE (DEFAULT IS LAST
SIX DIGITS OF ESN)
LOCK: Press MENU until phone displays "LOCK PRESS 0" then 0 to lock.
UNLOCK: Enter lock code.